Mould Cultivation Cabinet Incubator

1. Mould Cultivation Cabinet 2. BOD Incubator 3. Stainless steel inner chamber 4. CE Certificate

                                            Mould Cultivation Cabinet

Uses: This equipment is widely used in environmental protection, epidemic prevention, workshop, chemical pharmaceutical, drug test, fishery and other areas of research experiment and production department. It is the specialized thermostatic equipment for water analysis, BOD test, and bacteria, moulds and microorganism cultivation and storage, as well as plant cultivation and seed-breeding test. Characteristics: Characteristics of standard model incubator: 1. Stainless steel inner chamber; Foursquare semicircle transition, convenient to clean; Space between shelves is adjustable. 2. Micro-computer control system ensures precise and reliable temperature control; LCD enables multiple groups of data to be displayed at a time; Ultraviolet germicidal lamp. 3. Independent humidification, sterilization and temperature limit system with function of over-temperature alarm and auto-power-cut-off. 4. Test hole of ø 52mm at left side of container. 5. Double airtight door structure. 6. Fluoride-free refrigeration. Characteristics of functional model incubator: 1. Intelligent programmed temperature and humidity control system with program of 30 sections ensure timing, repeated or multistep running of temperature and humidity. 2. No freezing thanks to intelligent refrigeration and defrosting system. 3. Function of auto running, auto stopping and timing running, as well as parameter memorizing, power reset recovering and temperature display revising. 4. Watch timer and independent temperature safety device, which auto breaks off when over temperature limit. 5. Function of self-diagnosis, sensor failure alarm and over temperature protection. Note: Standard configuration: RS485 interface. Optional Accessory: 1. Desk printer 2. Supplementary oxygen, nitrogen interface 3. Communication software interface. 3. Test hole of ø 52mm at left side of chamber. 4. Brand compressor, fluoride-free refrigeration. 5. Double airtight door, which is convenient to on/off; with light in inner chamber for convenient viewing (The lamp can be replaced with ultraviolet ray sterilizing lamp as user's need). 6. Equipped with ultrasonic humidifier and intelligent atomizer. Characteristics of functional model incubator: 1. No freezing in inner chamber thanks to intelligent refrigeration and defrosting system. 2. Function of auto running, auto stopping and timing running, as well as parameter memorizing, power reset recovering and temperature display revising. 3. Watch timer and independent temperature safety device; Auto alarm and auto break off when over temperature limit to ensure experiment runs safely and no accident would happen. 4. Function of self-diagnosis, sensor failure alarm and over temperature protection. 5. RS-485 network connection interface for long-distance control. Note: 1. Standard configuration: RS485 interface. Optional Accessory: 1. Desk printer 2. Supplementary oxygen, nitrogen interface 3. Communication software interface.

 

Model	Standard Model	MJX-70BIII	MJX-150BIII	MJX-250BIII
	Functional Model	MJX-70BX	MJX-150BX	MJX-250BX
Voltage		220V/50Hz
Temp. Range  (º C)		With Humidification: 10~65    Without Humidification: 0~65º C
Tem. Distinguish Ability(º C)		0.1º C
Tem. Volatility (º C)		High Temperature: 0.5º C         Low Temperature: ± 1º C
Tem. Uniformity (º C)		± 1º C
HumidityRange		60-90%RH
Humidity Error		5-8%RH
Heating Power (w)		300	500	800
Refrigerant		R134a
Ambient Tem.		5-30º C
Inner Chamber Size(mm)		420× 350× 500	500× 400× 750	500× 500× 950
Exterior Size(mm)		570× 560× 1200	640× 620× 1270	660× 700× 1470
Packing Size(mm)		730× 720× 1170	820× 760× 1430	880× 825× 1645
N. W. (Kg)		59.5	68.5	72
G. W. (Kg)		86	98	116
Timing range		1-9999min

Mould Cultivation Cabinet Incubator